Silicone Smoothing Spatula — Tapered, Parametric (3D Print, Free)

🔖 Art. ML3D_0037

🔖 Art. ML3D_0037 FREE parametric SILICONE / SEALANT SMOOTHING SPATULA by MarineLab3D. A flat blade that tapers in thickness to a thin smoothing edge — perfect for tooling clean silicone joints. 🔻 Tapered thickness (e.g. 5 → 1 mm): thick side to hold, thin edge to smooth ⬛ Rectangular or square blade 📐 Set blade length, width, max/min thickness and corner radius 🧽 Flat bottom prints with no supports 🖨️ Print in PETG (a little flex) or TPU. The thinner the edge, the finer the finish — clean it with soapy water while tooling. Use “Customize dimensions” to set size, taper and corners, preview in 3D, then download free. 🖨️ No 3D printer? After your purchase, on your download page you can request an instant print quote: your model is sent pre-loaded to our partner Craftcloud, which compares ~180 print services worldwide and ships the finished part to your door — no printer or setup required. 📄 License — Personal use only. Print this model for your own personal use. Reselling or redistributing the file, or selling printed copies, is not allowed. © MarineLab3D — full terms: https://marinelab3d.com/pages/license

Related designs: Silicone Caulk Nozzle — Extendable & Bendable (310ml / 10oz, Parametric, 3D Print), Parametric O-Ring / Gasket — Round · Square · Rectangular (3D Print)

Disclaimer. MarineLab3D sells digital 3D files, not finished parts. The strength, fit and safety of the printed part depend on your printer, material, settings and assembly, which are outside our control. Verify all dimensions before printing, use the recommended material and inspect every print. Provided “as is” without warranty; to the maximum extent permitted by law MarineLab3D is not liable for any damage, loss or injury arising from their use. Not certified marine equipment. Full Disclaimer & Terms of Use.