Wall Mount Device Holder — Tablet · Phone · Garmin (Parametric Kit, 3D Print)

Parametric WALL MOUNT DEVICE HOLDER by MarineLab3D — a complete 3-part kit to mount and protect your gear on board or at home: tablet, phone/smartphone, Leatherman & multitools, Garmin GPS/chartplotter & handhelds, VHF/remotes, action cams, torches and more.

📦 The ZIP contains 3 parts:
• Wall plate — fixes to the bulkhead/wall, central M10 female thread
• Box/cradle — holds the device, parametric to your size
• M10 nut — locks the joint

🧭 Adjustable SIDE TILT: the box screws onto the plate via the M10 joint; rotate to the angle you want and lock it with the M10 nut.
🔩 Wall fixing with adjustable slots: vertical slot (height adjust) + horizontal slot (left/right adjust), both countersunk for flush screw heads. Flat back for full wall contact.
📐 Fully parametric box (internal sizes): height, width, depth — set it to fit your exact device.
⬇️ Lowerable FRONT wall: drop the front by any amount (even fully) to see and use the screen.
🕳️ Bottom 16×12 mm opening for charging cable/connector + two side openings for cable routing / ventilation.
🔝 Open top — drop the device straight in.

🖨️ Print in PETG or ASA (best UV/heat for cockpit) · 0.2 mm, 3–4 perimeters, 30–40% infill. The M10 threads are printed and ready to use.

Use “Customize dimensions” to set the box height/width/depth and front-wall drop, preview in 3D, then receive your ZIP (plate + box + nut) after purchase.