Hydro Wick Planter — Self-Watering Hydroponic Pot for 1 Plant (Parametric, 3D Print)

HYDRO WICK PLANTER by MarineLab3D — a passive self-watering set for growing 1 plant with the Wick System: no pumps, no electricity, days of autonomy between refills.

🌱 Two-part set: a ribbed PLANT POT (with a recessed foot, 1–2 wick holes and wide root holes) that seats into a deep WATER RESERVOIR.
💧 Capillary wicks draw the nutrient solution up from the reservoir into the growing medium — the plant drinks on its own.
🔩 Refill spout on the rim to top up and check the level without lifting the pot.
🪝 Wall-mountable: the reservoir carries the MarineLab3D modular L-clip and hangs on the included rail bar.
📐 Parametric on diameter (Ø90–180 mm): everything scales. At Ø120 → ~0.76 L water reservoir · ~0.65 L growing medium.
🪴 Great for herbs, salad greens, microgreens and hardy houseplants (basil, mint, lettuce, pothos…). Not for large, thirsty plants.

🖨️ Print in PETG or ASA (water/UV resistant) · 0.2 mm, 3–4 perimeters for a watertight reservoir. Parts print separately.

Use “Customize” to set the diameter and the number of wicks, preview in 3D, then receive your STL after purchase.