Double C-Clip Hook — Twin Swivel Clips (Parametric, 3D Print)

🔖 Art. ML3D_0050

Double C-clip hook by MarineLab3D — two snap-in C-clips joined back-to-back at the centre of their backs by a solid 15 mm pin, well fused for strength. Hang two items at once (tubes, handles, torches, brushes, cleaning gear). Each clip is fully independent: set its own inner Ø and its own height, so you can hold two different objects. One clip swivels 0–90° on the pin, so you can keep the two holders opposed or angle one as you like. Customize the dimensions, preview in 3D, then receive your STL after purchase. 🪝 Two opposed snap-in C-clips — press-fit, no screws. 🔩 Solid 15 mm pin through the centre of both backs — strong, well-fused joint. 🔄 Hook 2 swivels 0–90° on the pin: opposed (0°) up to a quarter turn (90°). 📏 Independent per hook: inner Ø (15–90 mm) and height (20–120 mm) for each clip. 🧵 Print specs: PETG or ASA for tough, flexible clips that snap and grip; 0.2 mm layers, 3+ perimeters. Prints flat, no supports. Use "Customize dimensions" to set both clip diameters, both heights and the swivel angle.