Double C-Clip Hook — Twin Swivel Clips (Parametric, 3D Print)

🔖 Art. ML3D_0050

Double C-clip hook by MarineLab3D — two snap-in C-clips joined back-to-back at the centre of their backs by a solid 15 mm pin, well fused for strength. Hang two items at once (tubes, handles, torches, brushes, cleaning gear). Each clip is fully independent: set its own inner Ø and its own height, so you can hold two different objects. One clip swivels 0–90° on the pin, so you can keep the two holders opposed or angle one as you like. Customize the dimensions, preview in 3D, then receive your STL after purchase. 🪝 Two opposed snap-in C-clips — press-fit, no screws. 🔩 Solid 15 mm pin through the centre of both backs — strong, well-fused joint. 🔄 Hook 2 swivels 0–90° on the pin: opposed (0°) up to a quarter turn (90°). 📏 Independent per hook: inner Ø (15–90 mm) and height (20–120 mm) for each clip. 🧵 Print specs: PETG or ASA for tough, flexible clips that snap and grip; 0.2 mm layers, 3+ perimeters. Prints flat, no supports. Use "Customize dimensions" to set both clip diameters, both heights and the swivel angle.

Related designs: Deck Rope Organizer / Fairlead — 1–5 Low-Friction Eyes (Parametric, 3D Print), Low-Friction Rope Ring — Grooved, Sized to Your Line (Parametric, 3D Print), Modular Wall Hook Rail — Up to 5 Hooks on a 2-Screw Bar (Parametric, 3D Print)

Disclaimer. MarineLab3D sells digital 3D files, not finished parts. The strength, fit and safety of the printed part depend on your printer, material, settings and assembly, which are outside our control. Verify all dimensions before printing, use the recommended material and inspect every print. Provided “as is” without warranty; to the maximum extent permitted by law MarineLab3D is not liable for any damage, loss or injury arising from their use. Not certified marine equipment. Full Disclaimer & Terms of Use.