Textile Padeye Kit — Bushing + Flanged Cap Nut + Washer — Parametric (3D Print)

🔖 Art. ML3D_0060

Textile-loop padeye by MarineLab3D — a parametric attachment point that generates a KIT of THREE parts: a FLANGED BUSHING that bonds to the hull/deck, a FLANGED CAP NUT, and a WASHER. The textile loop runs through the bushing’s rounded bore (no chafe); the cap nut threads on from outside and the washer spreads the load. You download a ZIP with three separate STL files (bushing + cap-nut + washer). 🪢 Two textile/rope sizes: 4 mm or 6 mm 📏 Customizable hull thickness (1–60 mm) · 25 mm round thread (matched male/female with clearance) · 3 mm smooth lead at the free end ⬇ Flanged bushing (flange bonded to the deck) · flanged cap nut (open on the flange side, closed on top, reinforcement chamfer) · load-spreading washer 🛠️ Assembly: once printed, complete the padeye by inserting the textile loop into the bushing — follow the video tutorial. 💪 Suggested max load: up to 300 kg (6 mm version) · up to 200 kg (4 mm version). 🧵 Recommended material: PA612-CF15 (carbon-reinforced nylon) for full load; PETG/ASA for light-duty only. 0.15–0.2 mm layers, 4+ perimeters, high infill on the load path. 📐 For correct performance: drill the deck hole precise to the millimetre (to match the bushing) and make sure the flange sits on a solid, flat bearing surface. ⚠️ Load-bearing part: always verify with your own load test before relying on it in service. Use “Customize dimensions” to set rope size and hull thickness, preview in 3D, then receive your ZIP (3 STL) after purchase.

Disclaimer. MarineLab3D sells digital 3D files, not finished parts. The strength, fit and safety of the printed part depend on your printer, material, settings and assembly, which are outside our control. Verify all dimensions before printing, use the recommended material and inspect every print. Provided “as is” without warranty; to the maximum extent permitted by law MarineLab3D is not liable for any damage, loss or injury arising from their use. Not certified marine equipment. Full Disclaimer & Terms of Use.

⚠ Load-bearing / pressure part. Suggested loads or pressures are indicative estimates for a well-printed part in the recommended material, not guarantees. Run your own load/pressure test before relying on it. Do not use for life-safety or critical applications (lifelines, harness/tether attachment, standing rigging, steering, gas or fuel systems) unless independently tested and certified by a qualified professional.

Related designs: Customisable Bushings & Washers — Parametric (3D Print), Boat Key — Winch Key for Tank/Deck Caps — Parametric (3D Print), Screw-out Deck Inspection Plate (Winch-open) — Parametric (3D Print)