Nachrichten
Mismatched Hoses On Board? 3D-Printed Reducers and Adapters That Actually Fit
How to size, print and fit 3D-printed barb reducers, elbows and tees to join mismatched hoses on board — and where a printed adapter is the wrong answer.
WeiterlesenA Weekend Project: Print a Full Set of Boat Plumbing Fittings
Spend a weekend printing a matched kit of boat plumbing fittings — adapters, elbows, barbs and caps — sized to fit your hoses and threads.
WeiterlesenHow to Measure a Hose and Thread for a Perfect 3D-Printed Fitting
Measure hose ID, OD and thread size the right way so your 3D-printed marine fitting fits first time — with a simple caliper-and-pitch workflow.
WeiterlesenThrough-Hull Fittings: Sizes, Threads and Safety for 3D Printing
A practical guide to through-hull fitting sizes, thread standards and the safety rules that decide what you should — and shouldn't — 3D print.
WeiterlesenBSP vs NPT Threads for Boat Plumbing: What to 3D Print
BSP and NPT threads look almost identical but don't seal together. Here's how to tell them apart and print the right fitting for your boat's plumbing.
Weiterlesen