Nachrichten
Make Your 3D Prints UV-Resistant for the Deck: ASA vs Coatings
Sunlight is the number one enemy of plastic on deck. Here's how to choose UV-stable materials like ASA and add coatings so your printed parts survive the season.
WeiterlesenAnchoring Upgrades: 3D-Printed Bow Rollers and Chain Guides
How to design, print and fit bow rollers, chain guides and anchor accessories that quiet the ground tackle and protect your bow.
WeiterlesenRepair a Broken Hatch Handle or Lock With a 3D-Printed Part
A broken hatch handle or lock knob can leave a compartment jammed shut. Here is how to measure, print, and fit a replacement part that actually works on board.
Weiterlesen3D-Printed Organizers to Tame Lines and Gear on Deck
Practical 3D-printed organizers that keep sheets, halyards and small gear tidy and secure on a working deck.
WeiterlesenBest 3D Printer for Marine Parts: An FDM Buyer's Guide
What actually matters in an FDM printer if you want to make boat parts: enclosure, hotend temperature, bed adhesion, build volume and the settings that turn a printer into a marine parts workshop.
WeiterlesenSealing 3D Prints: PTFE Tape, Epoxy and TPU Gaskets
A practical guide to making 3D-printed marine parts leak-free: when to use PTFE tape, thread sealant, epoxy coating or a printed TPU gasket — and how to pick the right one for each joint.
WeiterlesenGrow Herbs On Board: 3D-Printed Self-Watering Planters
Fresh basil and mint at sea are realistic if the planter survives heel, spray and a week alone — here is how to design, print and run a self-watering herb setup on a boat.
Weiterlesen3D-Printed Mounts for Garmin, Raymarine and B&G Chartplotters
A practical guide to 3D printing brackets, dash mounts and sun covers for Garmin, Raymarine and B&G chartplotters — measurements, materials and fitment tips.
WeiterlesenHow to 3D Print a Custom Cleat That Actually Holds
A practical guide to sizing, orienting and printing a marine cleat strong enough to trust for fenders, dock lines and light-duty mooring.
Weiterlesen5 Free 3D-Printable Upgrades Every Boat Owner Should Print
Five free, print-ready STL upgrades that solve everyday boat problems — from cap keys to line organizers — plus what to print them in.
Weiterlesen