Nachrichten

Bigger Than Your Printer: How to Split and Join Large 3D-Printed Boat Parts

When a boat part is larger than your print bed, splitting it into sections and joining them properly beats buying a bigger printer — here is how to plan the cuts, key the joints and bond them so th...

TPU on Board: Flexible 3D Prints for Chafe Guards, Gaskets and Bumpers

Rigid filaments get all the attention, but TPU quietly solves a different set of boat problems: chafe, vibration, sealing and grip. Here is how to choose a hardness, dial in the printer and put fle...

Dial In Your 3D Printer: Tolerance Calibration for Perfect-Fit Marine Parts

A 30-minute calibration routine — flow, XY compensation and shrinkage — so threads, hose barbs and snap-fits printed for your boat fit right the first time.

The Onboard Spares Kit: What to 3D Print Before You Cast Off

A practical guide to building a small kit of 3D-printed spare parts — caps, plugs, fittings, clips and a cap key — to carry aboard before your next passage.

Tidy Boat Wiring: 3D-Printed Cable Clips, Combs and Gland Covers

How to tame the wiring chaos behind your boat's panels and along the deck with 3D-printed cable clips, combs, loom mounts and gland covers — including material picks and drill-free mounting options.

Drill-Free Mounting: Attach 3D-Printed Parts Without Holes in Your Boat

How to mount 3D-printed accessories on board without drilling: VHB tape, structural adhesives, clamp-on and rail-mount designs that leave your gelcoat intact.

Heat-Set Inserts and Marine Hardware: Bolting 3D Prints to Your Boat

How to attach 3D-printed parts to your boat so they stay attached: heat-set inserts, stainless hardware, backing plates and the mistakes that crack prints.

Print Orientation and Strength: Boat Parts That Don't Snap

How layer orientation, wall count and infill determine the real-world strength of 3D-printed boat parts — and how to orient hooks, brackets and fittings so they don't fail along a layer line.

3D-Printed Galley Organizers: Keep the Boat Kitchen Tidy Under Way

Practical 3D-printed racks, holders and organizers that keep your boat's galley tidy and quiet while under way.

Winterizing: 3D-Printed Caps and Plugs to Seal Your Boat

A practical guide to closing off every opening on your boat for the off-season using 3D-printed caps, plugs and covers — what to seal, what to measure, and which materials survive a winter outdoors.